Where Can I Get a Airsoft Asg Aw .308

ASG AW308 Build Introduction:

So another popular sniper platform is the various L96 models which are based on the Maruzen APS-2 design/Type 96, With this one existence the ASG AW308.

I thought this would be another good build equally information technology'due south by and large cheaper than a VSR, they can perform quite well and the base guns aren't to expensive.

ASG AW308 Initial Thoughts:

The rifle arrived in the usual style of ASG box and included one magazine. The burglarize has some nice weight to it and I do enjoy the aesthetics. Build quality appears to be actually nice, minimal seams on the body and everything seems to work well……

The rifle was clocking in at 400fps out of the box and was +/- 6fps variance which was ok for a stock burglarize. One thing I like virtually the L96/AW308 models is the fact they funtion a lot quiter and ordinarily come with a 90 degree piston and trigger……..Commonly.

A good characteristic which works on this particular model is the cocking indicator, which on a lot of other clones does not work.

Build/Parts Used:

At that place are many upgrade parts bachelor for the Type 96 models, available from a multifariousness of manufacturers, for this build I used the below:

ASG AW308
Springer Customer Works Due south-Trigger
ZCI half dozen.02 499mm
Activity Ground forces Type 96 Hop Unit of measurement
Maple foliage Bucking
Maple Foliage Omega Nub
Laylax Blazon 96 Piston
Laylax Type 96 Spring Guide

The higher up parts are of a loftier quality, tin be purchased inside a reasonable budget and will aid with accuracy, durability, consistency.

Disassembly/Installation:

Firstly make sure the burglarize is non cocked or loaded, so you lot'll want to remove the two receiver screws and so you can separate the receiver from the stock.

From here you tin can put the stock to the side as you won't need information technology for a while. In one case you're downwards to the receiver, yous'll desire to start with the cylinder upgrades. To admission the cylinder you can pull down on the spring guide stopper and pull the commodities out.

Sadly on this particular the trigger housing is plastic, which is why I opted to bandy it out. On some models the trigger unit can really last a long time at 500fps. On this rifle I don't believe that is the case, just I'll encompass that more than presently.

One time the cylinder is out you lot'll need to remove the trigger unit itself which is washed by removing the two beneath screws. When removing the cylinder brand certain this pin doesn't get lost, information technology's very important!

Again on this model I was disappointed that ASG had opted for a 45 degree and not a ninety, which is what almost every other APS-ii/Type 96 uses. On many of the other clones, you can run 450-500fps on the stock trigger for some fourth dimension.

To access the cylinder internals, remove the cylinder head with some needle olfactory organ pliers.

The internals are the usual stuff you'd await, covered in grease. The cylinder and cylinder caput are fine for 450-500fps build in the short term.

They may final years, or they could last a few months. Only I'd only replace them if needed, otherwise I'd suggest the Laylax/AA Teflon ones.

In the cylinder there is a rod which needs to be removed with about aftermarket pistons and bound guides, it's used in the function of the cocking indicator.

To remove information technology you need to remove a minor chow spiral and then the master screw, which will betrayal a spring which you lot keep and then rod which yous pull out.

With the cylinder internals removed, you can whip in the new parts, making sure to grease the leap and spring guide slightly and put some silicon on the Oring. Equally ever PTFE tape a few wraps on the cylinder head threads for an improved airseal. And so put it to the side equally we'll install the trigger next.

Installing the trigger is a unproblematic chore, just put it in place and spiral it in. I opted for i of Springer Custom Works Paradigm Blazon 96 triggers, simply because in my opinion they are the best triggers on the marketplace.

With the trigger installed, cylinder internals installed y'all can put these parts back together and we can move onto the barrel and hop assembly.

To become to the inner barrel and hop yous offset need to remove the mag release which is held in with one spiral.

And then y'all need to remove the two minor receiver screws.

Once this is done you lot can slide the hop/barrel out from the outer barrel.

Firstly you need to remove the big black plastic spiral, then the adjuster screw, then unhook the adjustment ring form the hop arm, lift the hop arm up and slide the barrel/bucking out.

The bucking is a bit like a VSR bucking, just it isn't which is a bit of a hurting, I believe Falcon and Action Regular army make a bucking. Though in stock form the burglarize can hop heavy ammo and shoots well, the power to take AEG nubs is a bonus over other clones.

The barrel is a typical Type 96 butt with information technology'south cuts and the addition of the metal band, merely really proficient quality as far as stock barrels go.

With this barrel removed we can install the Action Army Type 96 sleeping accommodation, Maple Leaf Bucking, Maple Atomic number 82 Nub and ZCI butt.

The AA chamber comes with instructions, and then I won't explicate it hither as it's actually elementary. My nly tip is make sure that y'all put silicon on the exterior of the bucking equally they can be tough to slide in.

In one case you're happy with the bucking/nub alignment, you can add some electrical record barrel spacers so re install the unit of measurement to the outer barrel and install the magazine release.

ASG AW308 Build Last Thoughts:

This build is currently in progress until I determine what to do. My thought so far are that I'm a little bit disappointed with ASG'south delivery of this rifle, which is a shame as they did a good job on the proline M40a3 and the gas M40a5, everything on this is slightly of spec and considering it's more expensive than the WELL clones, at this stage I'd take to say I wouldn't be suggesting this rifle to friends/customers just however… however this may change once the build is completed.

Externally the quiality is better than most other clones and the QC appears good, but just the odd dimension change here and there makes it an unusual rifle.

Practice to a lapse in memory I forgot the stock cylinder head wouldn't fit in the AA bedroom, and then I'll have tho grab the AA cylinder ready.

Purchasing the cylinder set isn't the terminate of the earth as it's a worthwhile upgrade. Y'all could stick with the stock hop sleeping room and polish the barrel, upgrade the bucking etc

The trigger end of the burglarize is brilliant though, bolt pull is shine, return is effortless, compression is corking. I can't test beyond that until I go the nozzle and unit to mesh together.

I'll update this post once I've get the rifle fully working with the parts.

links:

Parts: Empire Airsoft
Rifle: ASG
Other Guides

Remember guys, if you've enjoyed this mail service or any of the other content I've put out, please cheque out my other platforms and consider condign a Patreon